Internal Computer Cables

This Serial ATA (SATA) power cable attaches to a 4-pin Molex connector from your power supply and provides a power connector for a SATA hard drive....

This adapter cable allows you to connect 2 SATA power connectors to one Molex plug. Specifications: Measurements 6" long

Can't quite connect your PWM fan to a PWM-ready motherboard? This 4-wire "Y" extension can add more than 15 inches between the two. Includes fourth...

Power SATA HDD using a power supply that may not have a SATA power connector. The SATA Combo Power Cable combines a SATA data cable and a 4-pin Mol...

Get your SATA drive connected with this internal data cable with 90 degree angled connectors at each end. Works with all 7-pin "L"-shaped SATA data...

Power one or two IDE (PATA) devices from a SATA power connector with this adapter. Specifications: Connector 1 SATA 15-pin power (connects to...

Power two SATA drives from one cable with this 15-pin Y-splitter power-only cable for SATA. Specifications: Length About 16 in. (41cm) Conn...

Connect two PWM fans with this 4-wire "Y" splitter. Includes fourth blue wire for speed control applications. Specifications: Connector 1 4-p...

Add a 4-pin floppy disk drive power connector to your computer's power supply. When your PSU is short one 4-pin FDD power cord, attach this "Y" spl...

Add another 4-pin Molex power connector to your computer's power supply. When your PSU is short one 4-pin Molex power cord, this "Y" splitter will ...

Use this splitter to power two PCI-e devices from one 6-pin PCI-e power connector. Optional pins on both plugs allow you to connect them to PCI-e 2...

This adapter allows you to connect a standard 4-pin Molex power connector to a 4-pin P4-style power connector, found sometimes on motherboards or g...

PWM fans receive their spin rate orders from your PC's motherboard. If you have multiple PWM fans, you can use this cable to sync them up to spin a...

Need just a little more stretch with one of your power supply's 4-wire internal power cables? This extension adds 12 inches to a standard PSU power...

Use this adapter to power a fan with a 4-pin Molex connector from a motherboard that uses a 3-pin power-out connector. You can attach the fan to ei...

Add another cooling fan to your case with this 3-pin splitter that feeds power from your motherboard to your CPU fan or other 3-pin cooling fan (so...

Use this adapter to connect newer 24-pin power supplies to older ATX 20-pin motherboards

Use this adapter to connect older 20-pin power supplies to newer 24-pin ATX v2.0+ or BTX motherboards

Convert a signal from a 3-pin motherboard connectors to a standard 4-pin Molex male or female connector.